2024 Pottinger Novacat T 3007 T ED

2024 Pottinger Novacat T 3007 T ED

Swipe to View More

  • Year 2024
  • Make Pottinger
  • Model Novacat T
2024 Pottinger Novacat T 3007 T ED

2024 Pottinger Novacat T 3007 T ED

2024 Pottinger NOVACAT T 3007 T ED

Our NOVACAT T trailed mowers with a working width of 3.04 m / 3.46 m are ideal for mowing with small tractors. On the trailed version with chassis, you do not need any lifting power, so you can also use lower power tractors. This helps you save fuel.

Features may include:

  • Cutter bar

The PÖTTINGER cutter bar features an impressively sleek and dynamic design. The 4 cm high cutter bar guarantees optimum crop flow. Due to its 28 cm width, the cutter bar delivers the best ground tracking which is ideal for achieving a first class cut.

  • TRI DRIVE

The driveline in the PÖTTINGER cutter bar is famed for its toughness and durability.

  • Mounting

The U-shaped mounting yoke provides a free angle of movement of +/-30°. The tractor and mower can then compensate for uneven ground independently of each other. An unlimited turning angle is also possible.

  • Side drawbar (NOVACAT 307 T)

The NOVACAT 307 T trailed disc mower features a side drawbar. This is folded hydraulically. The integrated check valve ensures that it locks in place.

  • Central drawbar (NOVACAT 3007 T / 3507 T)

NOVACAT 3007 T and NOVACAT 3507 T offer you maximum flexibility. The central drawbar, which can be swivelled hydraulically to both sides, enables you to mow on either side. Your mower will ideally adapt to your individual preferences and site conditions.

  • cutter bar suspension

Three-dimensional ground tracking is ensured by the freedom of movement enabled by the cutter bar being suspended in the portal frame. The low-slung cantilever system lets the cutter bar glide over bumps and ridges. The guide bars sloping up to the cutter bar provide excellent adaptation to ground contours. A top link guides the top of the mower unit. It is also used to set the cutting height.

  • Special lifting technology

A special lifting system provides 550 mm of clearance for driving over large swaths without damaging them. Uniform lifting/lowering is enabled by feeding oil from one half of the hydraulic cylinder to the cylinder on the other side.

  • COLLECTOR

With the COLLECTOR you can mow, condition and swath in just one pass. You save time and money and reduce your weather risk.

  • ED tine conditioner

The EXTRA DRY conditioner is a joint development with the Institute of Agricultural Engineering (IMAG-DLO) in Wageningen (Holland) that started in 1997 to prove there is better way.

Engine

Engine Power requirement: 75 hp

PTO

PTO Power, Rated Engine Speed 1000 rpm

Wheels & Tires

Tires, Front Specification 340/55-16
Tires, Rear Specification 340/55-16

Operational

Operating Conditions Coverage: 3,6 ha/h

Chassis

Hitch/Type Mounting: Semi-mounted | Drawbar: center-pull drawbar

Dimensions

Width, Working Position 10' (3,04 m)
Transport Width 9'10'' (3 m)
Transport Height 6'10'' (2,08 m)
Transport Length 24'10'' (7,56 m)
Width Conditioner: 6'11'' (2,12 m) | Swath width with conditioner min: 6'3'' (1,9 m) | Swath width with conditioner max: 8'10'' (2,7 m)

Weights

Weight 4698 lbs (2131 kg)

Features

Features Mower discs: 7 pcs. | Mower blades: 14 pcs. | Wear skids: 5 pcs. | High-cut skids: 5 pcs. | High-cut skids inside / outside: 1 pcs.

Product Photography